Home   |   About Us   |   Customer Support   

Products   |   Solutions   |   Technology   |   Environmental Issues   |   Where to buy    

Home>>Products>>Transceiver and PCI Network Cards

Technical Specs Installation Manual

10Base-T/FL Converter (MM and SM)

Unicom's XTEND-T/FL (SM) Converter is designed to connect your existing 10Base-T Ethernet network or workstations to a 10Base-FL network using Single Mode fiber optic cable. The converter repeats and converts signals from 10Base-T Ethernet to a 10Base-FL link, over distances up to 20,000 meters. The uplink button allows selection of a hub/switch or workstation connection using standard Category 5e patch cords. No more cross-over patch cords. The XTEND-T/FL (SM) provides activity LEDs simplifying troubleshooting and network maintenance. Available in a dual ST version only.

Part Number
Link Distance
RJ-45 for 10Base-T
Dual ST for 10Base-FL (MM)

100m Cat 3 ~ 5e for 10Base-T
2,000m 62.5/125Ám for 10Base-FL

RJ-45 for 10Base-T Dual ST for 10Base-FL (SM)

100m Category 3 ~ 5e for 10Base-T
20Km 9/125Ám for 10Base-FL

Power: 9V DC 1.0A

NOTE: The ETP-20108-SM does NOT fit in any UNICOM Media Chassis.

Products | Solutions | Technology | Where to Buy | Customer Support | Site Map | Feedback